VS Series Helium Mass Spectrometer Leak Detector is an advanced device used to detect and measure leaks in various systems that use helium as a tracer gas. Helium gas is inert, non-toxic, and has a small atomic size, allowing it to escape even through the smallest leaks, making it safe and non-hazardous. The leak detector separates helium in the tested environment and measures the amount of helium drawn using its mass spectrometer, allowing for high-precision leak detection. This precise measurement capability makes the VS Series ideal for critical leak detection in industries such as aerospace, automotive, and semiconductor manufacturing.
Key Specifications:
- Primary Pump: DS 42
- Maximum Test Port Pressure: 13 mbar (This is the maximum allowed pressure at the test port during a leak detection procedure)
- Nominal Pumping Speed: 34 l/min
- Minimum Detectable Leak: 5 x 10⁻¹² atm-cc/sec
- Maximum Relative Humidity (HR): 90% (The device can operate in environments with up to 90% relative humidity)
- Heat Load: 1000 W (+/- 5%)
- Air Pressure: 563 Torr (75 kPa) to 795 Torr (106 kPa)
- Maximum System Vibration: 3 G (Turbo Limit)
- Single rotation speed Turbo: 70K RPM (The turbo pump inside the device rotates at 70,000 RPM)
- Leak Test Range: 10⁻¹¹ to 10⁻⁴
- Maximum Spectrometer Pressure: 10⁻⁴ Torr (This is the highest pressure at which the mass spectrometer can effectively operate)
- Cross-Transition: 10 Torr decreasing – 12 Torr increasing
- Precision in High-Pressure Test Mode: 1 x 10⁻⁸ atm-cc/sec
- Weight: 63 kg / 140 lbs