19 December 2024

This device, operating with heating and time relay functions, has the ability to reach a specific temperature and maintain it for a set period of time using auto-tune PID control and time relay functions. Depending on the selected sensor type, the temperature measurement range may vary, and within this range, the device provides precise temperature control. Additionally, the device performs a countdown when the time relay is triggered, and at the end of the desired time, it gives an alarm output.

• Dimensions: 48×48 mm
• Sensor Types: J, K, T, S, R type thermocouples (T/C), and Pt100 sensors with selectable input types.
• Measurement Range:
  • J Type T/C: -100 to 600°C
  • K Type T/C: -100 to 1300°C
  • T Type T/C: -100 to 400°C
  • S and R Type T/C: 0 to 1750°C
  • Pt100: -100 to 600°C or -99.9 to 600.0°C for accurate measurements.
• Accuracy: ±0.3% of the full scale
• Internal time relay PID temperature controller
• Auto-tune feature for automatic calculation of PID parameters
• Time adjustable: Up to 99:59 hours
• Alarm ON time adjustable: Up to 99:59 minutes
• Sensor Types: T/C (J, K, T, S, R), Pt100, optional multi-input
• Control Mode: P, PI, PD, PID, or ON-OFF control – selectable
• Overshoot prevention: In PID mode, with anti-windup feature
• Environment temperature compensation for T/C and line compensation for Pt100
• Curve correction using stored ℃/mV and ℃/Ohm conversion tables
• Offset: Option to add an offset to the measurement value
• Sensitivity: ±1°C or ±0.1°C
• Storage Temperature: -10 to 60°C (without condensation)
• Operating Temperature: 0 to 50°C
• Relative Humidity: Up to 80% at 30°C, linearly decreasing to 50% at 50°C (without condensation)
• Accuracy: ±0.3%
• Memory: Continuous storage of program and control parameters.